




The Radian® Magazine Base Pad is a direct replacement part for the CANiK® MC9L, MC9LS, MC9 Prime, MC9 Prime NC & PRIME RADIAN OEM magazines. The Radian® base pad adds weight to the bottom of the magazine which aids in dropping empty magazines. A larger grip surface allows users to index spare magazines from holsters for quicker reloads whiles also being able to easily extract a stuck magazine. Sold in a set of two.
*Magazines not included.
2 - Magazine Base Pads
Magazine(s) not included.
STEP 01 | Remove the OEM base plate by holding the magazine upside down, inserting a flathead screwdriver, your fingernail or similar tool into the tab on the back of the magazine and pulling it downward. With the metal tab pulled fully downward, apply pressure to the rear of the base plate. The base plate should slide off the front of the magazine.
NOTE | Contain the spring and follower by keeping your thumb on the bottom of the magazine while the OEM base plate is being removed.
STEP 02 | With the OEM base plate now removed, depress the spring and bottom plate while aligning the CANiK Magazine Base Pad with the rails on front of the magazine. Slide the CANiK Base Pad towards the rear of the magazine until the metal tab at the rear snaps into place.
Magazine(s) not included.
8BMX3